pub struct RenderingGraphics<'gfx, 'pass> { /* private fields */ }
Expand description

A graphics context used to render previously prepared graphics.

This type is used to render these types:

Implementations§

source§

impl<'gfx, 'pass> RenderingGraphics<'gfx, 'pass>

source

pub const fn device(&self) -> &'gfx Device

Returns a reference to the underlying [wgpu::Device].

source

pub const fn queue(&self) -> &'gfx Queue

Returns a reference to the underlying [wgpu::Queue].

source

pub fn clipped_to(&mut self, clip: Rect<UPx>) -> ClipGuard<'_, Self>

Returns a ClipGuard that causes all drawing operations to be offset and clipped to clip until it is dropped.

This function causes the RenderingGraphics to act as if the origin of the context is clip.origin, and the size of the context is clip.size. This means that rendering at 0,0 will actually render at the effective clip rect’s origin.

clip is relative to the current clip rect and cannot extend the current clipping rectangle.

source

pub const fn size(&self) -> Size<UPx>

Returns the current size of the graphics area being rendered to.

If the graphics has been clipped, this returns the current width of the clipped area.

source

pub const fn scale(&self) -> Fraction

Returns the current scaling factor of the display being rendered to.

Trait Implementations§

source§

impl Clipped for RenderingGraphics<'_, '_>

source§

fn pop_clip(&mut self)

Restores the clipping rect to the previous state before the last call to Clipped::push_clip(). Read more
source§

fn push_clip(&mut self, clip: Rect<UPx>)

Pushes a new clipping state to the clipping stack. Read more
source§

fn clipped_to(&mut self, clip: Rect<UPx>) -> ClipGuard<'_, Self>

Returns a ClipGuard that causes all drawing operations to be offset and clipped to clip until it is dropped. Read more
source§

impl Drop for RenderingGraphics<'_, '_>

source§

fn drop(&mut self)

Executes the destructor for this type. Read more

Auto Trait Implementations§

§

impl<'gfx, 'pass> Freeze for RenderingGraphics<'gfx, 'pass>

§

impl<'gfx, 'pass> !RefUnwindSafe for RenderingGraphics<'gfx, 'pass>

§

impl<'gfx, 'pass> Send for RenderingGraphics<'gfx, 'pass>

§

impl<'gfx, 'pass> Sync for RenderingGraphics<'gfx, 'pass>

§

impl<'gfx, 'pass> Unpin for RenderingGraphics<'gfx, 'pass>

§

impl<'gfx, 'pass> !UnwindSafe for RenderingGraphics<'gfx, 'pass>

Blanket Implementations§

source§

impl<S, D, Swp, Dwp, T> AdaptInto<D, Swp, Dwp, T> for S
where T: Real + Zero + Arithmetics + Clone, Swp: WhitePoint<T>, Dwp: WhitePoint<T>, D: AdaptFrom<S, Swp, Dwp, T>,

source§

fn adapt_into_using<M>(self, method: M) -> D
where M: TransformMatrix<T>,

Convert the source color to the destination color using the specified method.
source§

fn adapt_into(self) -> D

Convert the source color to the destination color using the bradford method by default.
source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T, C> ArraysFrom<C> for T
where C: IntoArrays<T>,

source§

fn arrays_from(colors: C) -> T

Cast a collection of colors into a collection of arrays.
source§

impl<T, C> ArraysInto<C> for T
where C: FromArrays<T>,

source§

fn arrays_into(self) -> C

Cast this collection of arrays into a collection of colors.
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<WpParam, T, U> Cam16IntoUnclamped<WpParam, T> for U
where T: FromCam16Unclamped<WpParam, U>,

§

type Scalar = <T as FromCam16Unclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
source§

fn cam16_into_unclamped( self, parameters: BakedParameters<WpParam, <U as Cam16IntoUnclamped<WpParam, T>>::Scalar> ) -> T

Converts self into C, using the provided parameters.
§

impl<A> Cast for A

§

fn cast<To>(self) -> To
where To: CastFrom<A>,

Casts self to the To type. This may be a lossy operation.
§

impl<A> CastFrom<A> for A

§

fn from_cast(from: A) -> A

Returns from as Self.
§

impl<A, B> CastInto<A> for B
where A: CastFrom<B>,

§

fn cast_into(self) -> A

Returns self as To.
source§

impl<T, C> ComponentsFrom<C> for T
where C: IntoComponents<T>,

source§

fn components_from(colors: C) -> T

Cast a collection of colors into a collection of color components.
§

impl<T> Downcast<T> for T

§

fn downcast(&self) -> &T

§

impl<T> Downcast for T
where T: Any,

§

fn into_any(self: Box<T>) -> Box<dyn Any>

Convert Box<dyn Trait> (where Trait: Downcast) to Box<dyn Any>. Box<dyn Any> can then be further downcast into Box<ConcreteType> where ConcreteType implements Trait.
§

fn into_any_rc(self: Rc<T>) -> Rc<dyn Any>

Convert Rc<Trait> (where Trait: Downcast) to Rc<Any>. Rc<Any> can then be further downcast into Rc<ConcreteType> where ConcreteType implements Trait.
§

fn as_any(&self) -> &(dyn Any + 'static)

Convert &Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &Any’s vtable from &Trait’s.
§

fn as_any_mut(&mut self) -> &mut (dyn Any + 'static)

Convert &mut Trait (where Trait: Downcast) to &Any. This is needed since Rust cannot generate &mut Any’s vtable from &mut Trait’s.
§

impl<T> DowncastSync for T
where T: Any + Send + Sync,

§

fn into_any_arc(self: Arc<T>) -> Arc<dyn Any + Send + Sync>

Convert Arc<Trait> (where Trait: Downcast) to Arc<Any>. Arc<Any> can then be further downcast into Arc<ConcreteType> where ConcreteType implements Trait.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T> FromAngle<T> for T

source§

fn from_angle(angle: T) -> T

Performs a conversion from angle.
source§

impl<T, U> FromStimulus<U> for T
where U: IntoStimulus<T>,

source§

fn from_stimulus(other: U) -> T

Converts other into Self, while performing the appropriate scaling, rounding and clamping.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> IntoAngle<U> for T
where U: FromAngle<T>,

source§

fn into_angle(self) -> U

Performs a conversion into T.
source§

impl<WpParam, T, U> IntoCam16Unclamped<WpParam, T> for U
where T: Cam16FromUnclamped<WpParam, U>,

§

type Scalar = <T as Cam16FromUnclamped<WpParam, U>>::Scalar

The number type that’s used in parameters when converting.
source§

fn into_cam16_unclamped( self, parameters: BakedParameters<WpParam, <U as IntoCam16Unclamped<WpParam, T>>::Scalar> ) -> T

Converts self into C, using the provided parameters.
source§

impl<T, U> IntoColor<U> for T
where U: FromColor<T>,

source§

fn into_color(self) -> U

Convert into T with values clamped to the color defined bounds Read more
source§

impl<T, U> IntoColorUnclamped<U> for T
where U: FromColorUnclamped<T>,

source§

fn into_color_unclamped(self) -> U

Convert into T. The resulting color might be invalid in its color space Read more
source§

impl<T> IntoStimulus<T> for T

source§

fn into_stimulus(self) -> T

Converts self into T, while performing the appropriate scaling, rounding and clamping.
source§

impl<T, C> TryComponentsInto<C> for T
where C: TryFromComponents<T>,

§

type Error = <C as TryFromComponents<T>>::Error

The error for when try_into_colors fails to cast.
source§

fn try_components_into(self) -> Result<C, <T as TryComponentsInto<C>>::Error>

Try to cast this collection of color components into a collection of colors. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T, U> TryIntoColor<U> for T
where U: TryFromColor<T>,

source§

fn try_into_color(self) -> Result<U, OutOfBounds<U>>

Convert into T, returning ok if the color is inside of its defined range, otherwise an OutOfBounds error is returned which contains the unclamped color. Read more
source§

impl<C, U> UintsFrom<C> for U
where C: IntoUints<U>,

source§

fn uints_from(colors: C) -> U

Cast a collection of colors into a collection of unsigned integers.
source§

impl<C, U> UintsInto<C> for U
where C: FromUints<U>,

source§

fn uints_into(self) -> C

Cast this collection of unsigned integers into a collection of colors.
§

impl<T> Upcast<T> for T

§

fn upcast(&self) -> Option<&T>

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

impl<T> WasmNotSend for T
where T: Send,

§

impl<T> WasmNotSendSync for T
where T: WasmNotSend + WasmNotSync,

§

impl<T> WasmNotSync for T
where T: Sync,